JC repaints
Re: JC repaints
With this colorfull AS-332L1 of Helicopter squadron 01.044 Solenzara, repaints are completed. Now i begin flightplans.
Jacques
Jacques
- miljan
- MAIW Developer
- Posts: 2144
- Joined: 31 Jul 2009, 21:34
- Version: P3D
- Location: Between continents
Re: JC repaints
This is the model with small sponsons, make sure you removed rivets that are going on big sponsonsjcapde wrote:Hello!
Preview of a future pack for Miljan Korac Cougar AI model and paintkirt . Five French Air Force helicopters of Squadron 00-060 (Villacoublay BA107) and EH 01-044 (Solenzara BA126)
Thank you for repainting my models
VIVA LA VIDA
Re: JC repaints
Hi Jacques,jcapde wrote:With this colorfull AS-332L1 of Helicopter squadron 01.044 Solenzara, repaints are completed. Now i begin flightplans.
Jacques
Looks great, cant beat a bit of colour on a super model. When there done please feel free to add them to the MAIW download Hangar using the below link for the community to find and share.
http://www.militaryaiworks.com/download ... ile-upload
Regards
Mark
Re: JC repaints
Hello,
Next pack : Swiss Air Force Pilotenschule based at Emmen with eight Pilatus PC-21. For MGAI AI model.
Jacques
Next pack : Swiss Air Force Pilotenschule based at Emmen with eight Pilatus PC-21. For MGAI AI model.
Jacques
Re: JC repaints
No answers about RAF Shawbury scenery?merlin101 wrote:Love the Squirrel! Is it available now? If the RAF/Army ones being done, anyone know of scenery for Shawbury?
Dave
Miguel
Re: JC repaints
I found an scenery and contact the developer, Mr. Anders. That his answer:
"Hello Miguel.
Thank you for your feedback.
Actually it wasn't the default one at all. It was just one with only the basic parts added.
I always just planned to use the airport with helicopters so I never added any taxiways, runways or other stuff. It's just a "you see what you get" kind of scenery.
If anyone would like to modify it and make complete afcad for it nothing would make me happier.
Take-care
mvh Anders"
"Hello Miguel.
Thank you for your feedback.
Actually it wasn't the default one at all. It was just one with only the basic parts added.
I always just planned to use the airport with helicopters so I never added any taxiways, runways or other stuff. It's just a "you see what you get" kind of scenery.
If anyone would like to modify it and make complete afcad for it nothing would make me happier.
Take-care
mvh Anders"
Miguel
Re: JC repaints
Where can I download the Shawbury Squirrels/Griffins?
I have made a repaint myself and have been to the place. One helo came and landed near us at SLEAP EGCV...
I have made a repaint myself and have been to the place. One helo came and landed near us at SLEAP EGCV...
Re: JC repaints
There are no Griffins as there is no AI 412 model.
If you look on the previous page of this thread it will tell you that the paints are on flightsim.com
If you look on the previous page of this thread it will tell you that the paints are on flightsim.com
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: JC repaints
UKMil has an AI Griffin, although you'll have to register to get hold of it. I don't know if it's true AI, though, i.e. LOD's et cetera..
Jon G
Jon G
Re: JC repaints
In a really low number, I use this one:
http://dl.dropbox.com/u/9012304/Velivol ... %202.0.rar
It's a mod of the original Jordan Moore 412.
Absolutely not a real AI. Three LODs: 30332; 3682; 12 polygons....
Giorgio
http://dl.dropbox.com/u/9012304/Velivol ... %202.0.rar
It's a mod of the original Jordan Moore 412.
Absolutely not a real AI. Three LODs: 30332; 3682; 12 polygons....
Giorgio
Re: JC repaints
Jordan's original model has 4 LODs, albeit high in polys, but as you say usable in small gatherings. That's what I use. So fine for the couple at Valley and Akrotiri but you wouldn't the full compliment at Shawbury at the same time. Does the one you have linked to have some other mod, Giorgio?
Re: JC repaints
Hermit, I'm not sure to understand what you mean , btw the 412 I linked has these models:
model.GF (the only I use)
model
model.army
model.cara
model.cara_cc10
model.cara_cc10_f
model.cara_f
model.cara_s
model.cos
model.sar
model.slick
Giorgio
model.GF (the only I use)
model
model.army
model.cara
model.cara_cc10
model.cara_cc10_f
model.cara_f
model.cara_s
model.cos
model.sar
model.slick
Giorgio
Re: JC repaints
I was pointing out that Jordan Moore's original 412 on Hovercontrol has 4 LODs (i'm using slick and sar models). I amended the aircraft.cfg to use the stemme heli files for AI use. You said your link was to a 3 LOD mod of Jordan's model so I was enquiring in what way it was different in case it would be better to use than the one I already use.
Re: JC repaints
Gents, the salient point here is that there is no true freeware AI Bell 412.
The Ukmil one is not freeware as you have to pay to join and download it. If it is freeware, providing that somebody has joined and downloaded it, then I wouldn't mind a copy to test out but my guess is that this is not allowed.
On the other two options you discussed are there any schemes available for the DHFS, SARTU and 84 Sqn available? I am guessing not so I think that we are back to the answer to the original question which is that there are no Griffins.
I would love to be proved wrong.
The Ukmil one is not freeware as you have to pay to join and download it. If it is freeware, providing that somebody has joined and downloaded it, then I wouldn't mind a copy to test out but my guess is that this is not allowed.
On the other two options you discussed are there any schemes available for the DHFS, SARTU and 84 Sqn available? I am guessing not so I think that we are back to the answer to the original question which is that there are no Griffins.
I would love to be proved wrong.
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: JC repaints
Agreed, no true AI. Giorgio and I are both pointing out that there are usable alternative models (with a few LODs) which are better than nothing as long as they are used in limited numbers.Firebird wrote:Gents, the salient point here is that there is no true freeware AI Bell 412.
The Ukmil one is not freeware as you have to pay to join and download it. If it is freeware, providing that somebody has joined and downloaded it, then I wouldn't mind a copy to test out but my guess is that this is not allowed.
On the other two options you discussed are there any schemes available for the DHFS, SARTU and 84 Sqn available? I am guessing not so I think that we are back to the answer to the original question which is that there are no Griffins.
I would love to be proved wrong.
Search '412' on Hovercontrol and you'll find an HAR2 grey rescue paint on page 16 and a DHFS black/yellow paint plus JM's base model on page 24. As stated above stemme air/cfg heli file conversion needed.
Anyway, I don't wish to hijack Jacques thread any further so I withdraw my question to Giorgio and will stick with what I have got.
Re: JC repaints
I don't mind the UKMIL Bell 412. It lifts off vertically and looks good from a distance. Just don't look at the nose and lack of horizontal stabilizer too much..
Re: JC repaints
P.S - Can I download that French white Puma anywhere? Looks gorgeous!!
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: JC repaints
It would be good to design some AI helicopters with skids, but the problem is the hover taxi. Unlike the wheel-based helicopters, the skid-based ones need to lift off the ground a foot or so after engine start rather than taxi with the skids scraping along the ground.
The animation to do that is straight forward, but it needs an XML trigger for it to happen. I don't believe Microsoft have provided anything in FS9 or FSX that we can latch on to that would work. It would also need to be a separate trigger that does not interfere with the one used for the lift on take-off.
John
The animation to do that is straight forward, but it needs an XML trigger for it to happen. I don't believe Microsoft have provided anything in FS9 or FSX that we can latch on to that would work. It would also need to be a separate trigger that does not interfere with the one used for the lift on take-off.
John
Re: JC repaints
Could the lift off be somehow linked to a set time from engine start? Or to an rpm increase to initiate taxi? I don't know much about xml, so I apologize if that makes no sense.
Jon G
Jon G
Re: JC repaints
Could you key on taxi light or are they only active at night?
Or, I assume take off animation is based on throttle position or engine rpm or something, why not activate say the first 10% of take off animation based on the throttle possition or rpm when taxiing which should more that idle but less than take off?
I played around with Jordan's Blackhawk a few years ago and implemeted take off animation using XML from Nick Black where throttle position >95% triggered 100% of the animation. It would take some trial and error but you should be able to trigger a percentage of the take off animation for throttle or rpm >0% and <95%. Rather than using standard flap animation I animated 3 positions of the stabilator (0, 20, 40 degrees) based on airspeed using this XML which looked really cool when landing:
<part>
<name>l_flap_key</name>
<animation>
<parameter>
<code>
(A:AIRSPEED INDICATED,knots)
d 30 < if{ 40 } els{
d 60 < if{ 20 } els{
d 60 > if{ 0 } els{ 40 }
</code>
<lag>10</lag>
</parameter>
</animation>
</part>
So similar XML could be used on the parent part used for the take off animation but the result of the conditons would be percentage of the take off animation rather than the flap angle. Sounds logical but could be bollocks.
Or, I assume take off animation is based on throttle position or engine rpm or something, why not activate say the first 10% of take off animation based on the throttle possition or rpm when taxiing which should more that idle but less than take off?
I played around with Jordan's Blackhawk a few years ago and implemeted take off animation using XML from Nick Black where throttle position >95% triggered 100% of the animation. It would take some trial and error but you should be able to trigger a percentage of the take off animation for throttle or rpm >0% and <95%. Rather than using standard flap animation I animated 3 positions of the stabilator (0, 20, 40 degrees) based on airspeed using this XML which looked really cool when landing:
<part>
<name>l_flap_key</name>
<animation>
<parameter>
<code>
(A:AIRSPEED INDICATED,knots)
d 30 < if{ 40 } els{
d 60 < if{ 20 } els{
d 60 > if{ 0 } els{ 40 }
</code>
<lag>10</lag>
</parameter>
</animation>
</part>
So similar XML could be used on the parent part used for the take off animation but the result of the conditons would be percentage of the take off animation rather than the flap angle. Sounds logical but could be bollocks.